SATA DryJet 2, red dry blow gun including EU nipple

For the effective drying of water-based paints. Water-based paints have longer flash-off times than solvent-based paints. The resulting longer occupancy times of the paint booths lead to decreased productivity. The SATA dry jet 2 drying air gun significantly reduces flash-off times and thus booth occupancy times.

How it works:
The SATA dry jet 2 drying air gun utilizes the Venturi principle – it draws in a significantly larger volume of ambient air along with the supplied compressed air. For example, a supply of 300 Nl/min of compressed air is transformed into approximately 3,000 Nl/min, which is directly used for drying. Crucial for a modern reduction in drying time is not only the large air volume but also a uniform, wide airflow. This is generated in the injector zone of the new wide-jet nozzle. Compared to conventional models on the market, it achieves approximately 15% higher drying performance.

Economy:
The investment pays for itself quickly through the time saved during drying. The Venturi principle keeps air consumption low. Using the SATA dry jet 2 usually eliminates the need for expensive heating of the paint booths.

Other product-specific advantages:

• Shorter drying times for water-based paints
• Low investment costs
• Integrated air regulation
• Disposable sieve from the RPS system
• Ergonomic handle
• Durable and low-maintenance

Technical data