Pressed-in pressure piece (ball) Hardened spindle surface, wear-resistant Standard thread for rapid force build-up Heat-treated steel accordi...

Pressed-in pressure piece (ball) Hardened spindle surface, wear-resistant Standard thread for rapid force build-up Heat-treated steel accordi...

Total length [mm]: 60 mm Contents (number of pieces): 1 pc. Net weight [g]: 250 g Net weight [kg]: 0.25 kg Usable length: 35 mm ...

Total length [mm]: 110 mm Contents (number of pieces): 1 pc. Net weight [g]: 600 g Net weight [kg]: 0.6 kg Usable length: 85 mm ...

Total length [mm]: 160 mm Contents (number of pieces): 1 pc. Net weight [g]: 950 g Net weight [kg]: 0.95 kg Usable length: 135 mm...

Used for removing, for example, bearings and gears that are mounted on hollow shafts or in housings. Here, the spindle pressure piece serves ...

Extensions for the puller No. 1.38 Connection thread: M24x1.5 for puller: 1.38/5 Total length [mm]: 200 mm Contents (number of piece...

For removing tapered roller bearings, ball bearings, inner races and other tightly fitting or thin-walled parts. Method of operation: To remo...

Suitable for removing small ball bearings, as there is often no space for counter supports. Also usable with thread adapters No. 1.81 Conn...

Suitable for removing small ball bearings, as there is often no space for counter supports. Also usable with thread adapters No. 1.81 Conn...

The thread adapters allow, for example, the removal of threaded caps that have a threaded hole. No. 1.81/K-1: With slide hammer No. 1.35/1, r...

The thread adapters allow, for example, the removal of threaded caps that have a threaded hole. For threads M4, M5, M6, M8, M10, M12, M14, M1...

The thread adapters allow, for example, the removal of threaded caps with 1 or 2 threaded holes. No. 1.81/10: For puller No. 1.38/0, 1.38/1 N...

The thread adapters allow, for example, the removal of threaded caps that have a threaded hole. No. 1.81/1: For slide hammer No. 1.35/1, 1.35...

The thread adapters allow, for example, the removal of threaded caps that have a threaded hole. No. 1.81/1: For slide hammer No. 1.35/1, 1.35...

Method of operation: Place the counter support on the housing and screw the spindle onto the spindle of the internal puller. Hold the knob an...

Method of operation: Place the counter support on the housing and screw the spindle onto the spindle of the internal puller. Hold the knob an...

This extractor can be used to remove wet cylinder liners from trucks (e.g., Mercedes Benz, MAN), cars, stationary engines, and other parts. M...

These pullers are used in conjunction with the No. 1.40 separating blades. The pull bolts are screwed into the threaded holes of the separati...

For spans from Ø 22 to 115 mm and spans up to 295 mm Includes thread adapter for internal threads M8-M18 For loosening and removing t...

For inner diameters of 12 - 35 mm For extremely tight-fitting ball bearings, rings, bushings and oil seals® With slide hammer and cou...

Maximum load 3 and 5 t, for spans up to Ø 200 mm outer, Ø 70-260 mm inner, and spans up to 300 mm, quick-release hooks with self-supporting T...

Robust construction Made of impact- and shock-resistant ABS plastic Splash-proof Lid and front handle for variable carrying of the L-BOXX® In...

With 2- and 3-arm truss With all-steel and slim hooks as well as extensions Extra slim pull hooks for tight installation spaces are i...